Through continuous research and development, we are always doing our best on product development and quality improvement.
This is the explanation about Myeong In Spring’s products.
As a coil form of shape, the both ends are connected in round shape and it is used for oil seal, shaft seal, belt drive motor and electronic connector etc. Because it can tolerate forces from every direction, it handles effectively the change of volume, pressure, temperature and viscosity.
Sample can be produced before mass production.
|KSD 3510 HSW||O||X||X||X|
|KSD 3535 STS304||O||O||O||O|
|KSD 3535 STS316||O||O||O||O|
|1) Permissible tolerance||thickness of spring||HSW3||±0.015|
|권경||2.0 or less||±0.05|
|2.5 or less||-0.05/±0.1|
|length of spring||100 or less||±0.5|
|2) Coherence||After increasing 40% of Spring’s length by cutting opposite side of bond, there should be no breakaway bond/ Joint section
|3) Joint section||screw: 3-4level
shape : TAPER